ACCESS Tonneau Covers
ACCESS tonneau covers are the roll-up and hard folding truck bed covers made by ACCESS Cover, listed here by truck, year and box length in every product title. The range runs from the Original roll-up and the Limited and Toolbox editions to the Lite Rider and the Lomax hard folding covers, with ACCESS bed seals and cargo tools alongside.
Because this collection is built from the ACCESS vendor, it also carries the ADARAC truck bed rack line: Aluminum Pro, M-Series and ADATRAC rails for F-150, Super Duty, GM 1500 and HD, Ram and Tundra beds. Most parts ship in 7 to 10 business days anywhere in Canada.
ACCESS roll-up and hard folding covers, plus the ADARAC rack system
ACCESS Cover is the tonneau brand of Agri-Cover, based in Jamestown, North Dakota, and it sells covers by exact box length: 5.5 foot, 6.5 foot, 6 foot 7 inch, 6 foot 9 inch or 8 foot, with the model years spelled out in every title. The soft covers are vinyl roll-ups that clamp to the bed rails without drilling; Lomax is a hard folding cover with rigid panels for a locked bed. Lite Rider, the entry roll-up, and the bed seal and trail seal kits round out the cover side.
The vendor rule also pulls in ADARAC, the ACCESS truck bed rack. Aluminum Pro, M-Series and ADATRAC rails mount to the bed rail and run with an ACCESS roll-up underneath, so a contractor can carry ladders over a covered box.
Shop ACCESS tonneau covers by type
Original and Limited Edition roll-up covers
The Original is the standard ACCESS soft roll-up: a vinyl cover that rolls forward to the cab and straps out of the way. The Limited Edition adds a lower-profile rail and a tighter seal at the bulkhead. Both are listed for F-150 beds from 2015 to 2025 and for GM, Ram and Tundra boxes by length.
Toolbox Edition roll-up covers
The Toolbox Edition is cut short at the cab so it seals against a crossover tool box instead of the bulkhead. If you searched for an F-150 bed cover with a toolbox, this is the one to match with a crossover box from Buyers Products truck tool boxes.
Lomax and Lomax Stance hard folding covers
Lomax is the ACCESS hard folding cover, listed in black for F-150 beds from 2004 to 2025 and for Silverado and Sierra HD 6.5 foot boxes. Lomax Stance is the raised-profile version that sits above the bed rail for a squarer look. Both fold toward the cab in sections so the tailgate end opens without removing the cover.
ADARAC truck bed racks and mounting plates
Aluminum Pro is listed for F-150 6.5 and 8 foot beds, Super Duty 6 foot 9 inch beds and the 2022 to 2024 Tundra. M-Series and the steel ADARAC fit GM 1500 and HD and Ram 1500, 2500 and 3500. ADATRAC is the track version, with mounting plates and ADAGRID panels sold separately.
Shop by vehicle
- Ford: F-150 2004 to 2025 and Super Duty 2017 to 2024, the deepest ACCESS coverage on the site.
- Chevrolet and GMC: 1500 from 2014 and HD from 2015, including 2020 to 2024 HD 6 foot 9 inch boxes.
- Ram: 1500 from 2009, 2500 and 3500 from 2010, 6 foot 4 inch beds.
- Toyota: Tundra 2022 to 2024, 6.5 foot box.
- Lincoln: Mark LT, which shares the F-150 bed.
Why buy ACCESS covers here
- Box length is in the title. You do not have to decode a part number to know whether a cover fits a 5.5 or 6.5 foot bed.
- Cover and rack from one maker. ADARAC racks and ACCESS roll-ups are listed together, so a rack-over-cover setup can be ordered as a matched pair.
- Canadian stock and shipping. Orders ship from Winnipeg, Manitoba, and most parts leave in 7 to 10 business days.
Choosing the right ACCESS cover
Measure the box from bulkhead to tailgate and match it to the length in the title; a 2015 F-150 can be 5.5, 6.5 or 8 feet, and the cover will not seal on the wrong one. Check for factory bed rail caps or a spray-in liner, since the ACCESS clamps sit on the rail. If you plan a crossover tool box, order the Toolbox Edition, not the Original.
If you are not sure what fits, contact us with your year, make, model and configuration.
Common questions
Does ACCESS make a tonneau cover that works with a toolbox?
Yes. The ACCESS Toolbox Edition is a roll-up cut to seal against a crossover tool box mounted at the cab end of the bed. Order it by truck and box length like any other ACCESS cover.
What is the difference between the ACCESS Original and Limited Edition?
Both are vinyl roll-ups on clamp-on rails. The Limited Edition uses a lower-profile rail and an improved bulkhead seal; the Original is the standard version.
Which ACCESS cover is hard folding?
Lomax and Lomax Stance are the ACCESS hard folding covers. They use rigid panels that fold toward the cab and lock, where the Original, Limited, Toolbox and Lite Rider are soft roll-ups.
Can I run an ADARAC rack with an ACCESS roll-up cover?
Yes. ADARAC was designed to mount on the bed rail above an ACCESS roll-up so the cover still opens under the rack. Match the rack to the same box length as the cover.