Buyers Products Hydraulics
Buyers Products truck hydraulics for dump bodies, spreaders and snow plows, sold by a Winnipeg dealer shipping across Canada. The collection carries upright reservoir and direct mount pump wetline kits with steel tanks to 50 gallons, electric sectional valves, flow control, gate, ball and selector valves, hydraulic motors, wing-type and stainless steel quick couplers, pressure gauges, oil level sensors and the SAM cylinders and hoses that fit Western, Fisher, Boss and Meyer plows.
Because the SaltDogg municipal hydraulic spreaders draw from the same catalogue, the hydraulic conveyor chain, auger and dual auger spreaders are listed here too. Most parts ship in 7 to 10 business days.
Truck hydraulics from the PTO pump to the cylinder
A dump hoist, a hydraulic spreader and a plow run on the same chain of parts: a pump driven off the PTO, a reservoir, a valve to direct the flow and a cylinder or motor to do the work. Buyers Products supplies each link. Wetline kits combine an upright reservoir or direct mount pump with a steel tank to 50 gallons, in CW or CCW rotation. Valves run from 40 GPM three-way units with power beyond to NPTF selector valves. Downstream sit hydraulic motors, SAM cylinders and hoses cross-referenced to Western, Meyer, Boss and Fisher numbers, and silicone filled 0 to 200 PSI gauges. This is a sub-collection of Buyers Products Vehicle Accessories.
Shop truck hydraulics by type
Pumps, reservoirs and wetline kits
The wetline kits are the starting point for a new dump body or a chassis that has never had hydraulics. Each is listed by tank capacity, rotation (CW or CCW) and tank material, and the oil level sensor kit with slosh shield adds low-oil protection. The drive side is in PTO driveline.
Sectional, flow control and gate valves
Electric sectional valves are the largest valve family, followed by flow control valves, full flow gate valves, brass body ball valves and selector valves. Air-operated hoist controls are in pneumatics, and the 60 inch and longer remote valve control cables are shared with cables and controls.
Hydraulic quick couplers
Wing-type quick couplers and stainless steel couplers are sold as individual halves by body size and thread. Wing style hand-tightens without a wrench; stainless is the pick where couplers live in salt spray on a spreader chute.
Hydraulic motors, cylinders and SaltDogg spreaders
Motors cover spreader augers, conveyor chains and spinners, with the 17.9 CIR auger motor and spinner gear motors listed as replacements for SaltDogg SHPE series and Meyer and Swenson spreaders. SAM lift, angle and power angling cylinders replace Western, Meyer, Blizzard and Sno-Way numbers; the full plow range is in SAM snow plow parts. The municipal hydraulic conveyor chain spreaders in 9, 10 and 12 foot lengths and the 6 to 14 cubic yard dual auger spreaders appear here as well as in SaltDogg spreaders.
Common applications
Dump truck and dump trailer builders use the wetline kits, hoist valves and gauges to fit a hoist to a chassis. Municipal fleets running hydraulic spreaders draw on the sectional valves and auger motors. Plow operators come for the SAM cylinders, hoses and couplers that replace OEM parts.
Why Buyers Products hydraulics
- Plow parts cross-referenced to OEM numbers. Hoses and cylinders name the Western, Meyer, Diamond, Boss, Fisher, Blizzard or Sno-Way part they replace.
- Wetline kits sold as complete systems. Reservoir, pump mount and tank arrive matched, with rotation and capacity stated up front.
- Spreader motors that match SaltDogg spreaders. The 17.9 CIR auger motor and spinner gear motors are listed as direct replacements for the SHPE series.
- Ships across Canada. Priced in Canadian dollars, most parts ship in 7 to 10 business days from Winnipeg.
Choosing the right hydraulic part
For a pump or wetline kit, start with the hoist's required flow and the PTO rotation, then pick tank capacity. For a valve, match the GPM rating, the number of work sections and whether you need power beyond for a second circuit. For a cylinder, measure bore, stroke and pin-to-pin length against the OEM number on the listing. Hoses are listed by inside diameter, length and end type (FJIC, NPT, MOR), so measure the old hose end to end. If you are not sure what fits, contact us with your year, make, model and configuration.
Common questions
Do you sell hydraulic quick couplers for a three-line plow setup?
The couplers here are sold as individual wing-type and stainless steel halves by size, so a three-line setup is built from separate 1/2 inch and 3/8 inch couplers rather than one bundled fitting. Check thread and body size on each listing against your plow-side halves.
Does Buyers make hydraulic pumps for dump trucks?
Yes. The direct mount pump and upright reservoir wetline kits are the dump truck pump packages, sold by tank size and rotation, and remote mount shaft driven pumps are listed separately.
Which snow plow brands do the SAM hoses and cylinders fit?
The listings name Western, Fisher, Boss, Meyer, Diamond, Blizzard and Sno-Way, each with the OEM number the SAM part replaces. Match the number rather than the plow model.